EVALUASI NILAI KERUSAKAN JALAN PADA RUAS MOLINGKAPOTO SIMPANG KWANDANG MENGGUNAKAN SURFACE DISTRESS INDEX (SDI) DAN INTERNATIONAL ROUGHNESS INDEX (IRI)

Moh. Reza Jahja; Frice Lahmudin Desei; Yuliyanti Kadir

doi:10.37905/cj.v6i1.173

Moh. Reza Jahja Jurusan Teknik Sipil, Fakultas Teknik, Universitas Negeri Gorontalo
Frice Lahmudin Desei Univeristas Negeri Gorontalo
Yuliyanti Kadir Univeristas Negeri Gorontalo

DOI: https://doi.org/10.37905/cj.v6i1.173

Abstract

Road damage is a complex problem and can cause major losses for road users.The purpose of this study is to analyze the damage to the Molingkapoto road at the Kwandang intersection, and to examine the appropriate handling of the damage that occurs. The methods used in the study are the SDI and IRI methods. The SDI method is a visual assessment of damage conditions. In calculating the SDI value, 4 elements are used, namely % crack area, crack gap width, number of holes/100 m and depth of wheel ruts. The IRI method is the value of road surface flatness calculated from the cumulative number of ups and downs of the longitudinal profile surface divided by the distance/length of the measured surface. The IRI value in this study was taken per 100 m using the Roadlab Pro application. The results of the SDI method analysis showed good conditions of 82%, moderate 12%, minor damage 3%, and severe damage 3%. The road conditions were dominated by good conditions along 2.7 km. The results of the IRI method analysis showed very good conditions of 0%, good conditions of 68%, moderate 29%, bad 3%, and very bad 0%. The road conditions were dominated by good conditions along 4.5 km. The combination of SDI and IRI values showed that Molingkapoto road at the Kwandang intersection sta. 6+300 to sta. 9+600 was in moderate condition and only required routine maintenance.

Keywords: Metode Surface Distress Index (SDI), International Roughness Index (IRI), Road Damage

Downloads

Download data is not yet available.

References

ALmalnalh, T. (2023). The Palvement Condition Index Functionall Evallualtion of Runwaly Palvement Used Palvement Condition Index (PCI) Method (Calse Study : Faltmalwalti Soekalrno ALirport Provinsi Bengkulu). Journall of Civil Engineering alnd Plalnning, 4(1), 14–25. https://doi.org/10.37253/jcep.v4i1.7660

Desei, F. L., Kaldir, Y., & Ende, AL. Z. (2023). Evallualsi Kerusalkaln Jallaln Menggunalkaln Metode Surfalce Distress Index daln Internaltionall Roughness Index. Konstruksial, 15(1), 67. https://doi.org/10.24853/jk.15.1.67-77

Direktoralt Jenderall Binal Malrgal. (2024). Malnuall Desalin Perkeralsaln Jallaln 2024. In Kementrialn PUPR. Direktoralt Jendrall Binal Malrgal.

Halrdiyaltmo, H. C. (2015). Pemelihalralaln Jallaln Ralyal (2nd ed.). Galdjalh Maldal University Press.

Ihsaln, W. N., Sutrisno, W., & Lalnggal, D. (2022). ALnallysis of Roald Surfalce Dalmalge Level on Roald Surfalce Calmpurejo-Waltes, Temalnggung Regency using The SDI (Surfalce Distress Index) Method. Internaltionall Conference on Sustalinalble Engineering alnd Technology, 47–55.

Jendrall, D. (2021). Pedomaln Desalin Geometrik Jallaln. Direktoralt Jendrall Binal Malrgal.

Palngesti, R. D., & Ralhmalwalti, R. (2020). Evallualsi Penilalialn Jallaln Menggunalkaln IRI Roaldroid di Ruals Jallaln Kalbupalten Balnyumals. SNITT- Politeknik Negeri Ballikpalpaln, 13, 16–24.

Salndynal, AL. N., Elfichral, AL., ALqillal, AL., Novalldi, K., & ALdimaln, E. Y. (2022). ALnallisis Perbalndingaln Tingkalt Kerusalkaln Jallaln Paldal Perkeralsaln Lentur Dengaln Metode PCI Daln Metode SDI (Studi Kalsus: Jallaln ALs-Shofal Pekalnbalru. Journall of Infralstucture alnd Civil Engneering, 2(2), 95–105.

Shresthal, S., & Khaldkal, R. (2021). ALssessment of Relaltionship between Roald Roughness alnd Palvement Surfalce Condition. Journall of ALdvalnced College of Engineering alnd Malnalgement, 6, 177–185. https://doi.org/10.3126/jalcem.v6i0.38357

Sukirmaln, S. (2010). Perencalnalaln Teball Struktur Perkeralsaln Lentur (1nd ed.). Noval.

Oktopianto, Y., Antonius, A., & Rochim, A. (2025). Evaluation of Urban Road Stability Through the Integration of the Surface Distress Index and International Roughness Index. Fondasi: Jurnal Teknik Sipil, 14(1), 1-12.

Isradi, M., Prasetijo, J., Hartatik, N., Abidin, Z., & Arifin, Z. (2021). Analysis of Urban Road Damage Assessment Using Surface Distress Index (SDI), Pavement Condition Index (PCI), and International Roughness Index (IRI) Methods. Review of International Geographical Education Online, 11(2), 699-715.